Difference between revisions of "Data Logger RADIO - GSM/GPRS modem"

From Experimental Hydrology Wiki
Jump to navigation Jump to search
(Created page with " == Description == GSM/GPRS Data Logger RADIO is a device used for accurate and cost-effective measurement applications. Thanks to the various configurable inputs of current...")
 
 
Line 1: Line 1:
 +
                                                                                                [[File:Radiox2 (2).jpg|200px|thumb|right|Data Logger RADIO]]
  
 +
==Product description:==
 +
GSM/GPRS Data Logger RADIO is a universal device used for accurate and cost-effective measurement applications. Thanks to the various configurable inputs of current, voltage, pulse or SDI-12 signal, the logger supports the majority of the most popular sensors available on the market.
  
−
== Description ==
+
The device has been designed for wide use in meteorological, agricultural, hydrological and industry related installations where precision, reliability and easy data access are key factors. Constant data transmission in 1 or 10 minute intervals is ensured by a built-in GSM/GPRS modem. All measurements are accessible through the intuitive web based Data Analysis System.
  
−
GSM/GPRS Data Logger RADIO is a device used for accurate and cost-effective measurement applications. Thanks to the various configurable inputs of current, voltage, pulse or SDI-12 signal, the logger supports the majority of the most popular sensors available on the market.
+
==Parameter to be measured:==
 +
humidity, temperature, water level, rainfall, soil moisture, wind speed, wind direction and other
  
−
The device has been designed for wide use in meteorological and hydrological installations where precision, reliability and easy data access are key factors. Constant data transmission in 1 or 10 minute intervals is ensured by a built-in GSM/GPRS modem. All measurements are accessible through the intuitive web based Data Monitoring SystemSystem.
+
==Method:==
 +
4 configurable inputs with voltage (0-3V, 0-10V), current (0-20mA), pulse type signal and 4 inputs with SDI-12 signal type
  
 +
==Equipment:==
 +
Waterproof and dust tight enclosure made of polycarbon. Sutable for outdoor installation.
  
−
== Inputs configuration ==
+
Power supply - 5–35V DC input from external primary or rechargeable batteries, external DC power supply, or regulated solar panel
 +
Build-in GSM 2G modem with standard antenna.
 +
1 minute and 10 minute data sending intervals.
 +
Monitoring of 4 additional technical parameters:
 +
main power voltage, backup battery voltage, internal temperature and GSM signal strength. 

 +
Internal memory backup for min. 30 days depending on the no. of sensors.
 +
Dedicated on-line system for data view, storage and download.
 +
Customized alarms.
 +
Dedicated PC application for logger setup and backup data download.
  
−
'''4 CONFIGURABLE INPUTS'''
+
==Advantages:==
  
−
Inputs can operate with the following signal types:
+
GSM/GPRS data transmission in1 or 10 minute intervals
 +
4 fully configurable inputs (0-3V, 0-10V, 4-20mA, pulse counter)
 +
SDI-12 input for up to 4 additional sensors
 +
One second data sampling
 +
High accuracy analog measurements
 +
Inlogger battery backup ensure fail-safe operation
 +
Web-based system for data visualization
 +
User configurable alarms
 +
Offline software for configuration and diagnostics
  
−
0-3V or 0-10V
+
==Problems/Questions:==
−
Software selectable two voltage ranges let you take full advantage of the data logger’s resolution. Parameters measured by voltage configuration include barometric pressure, ambient temperature, relative humidity, solar radiation, etc.
 
  
−
0-20 mA
+
==Price:==
−
Allows the use of sensors with 4 – 20 mA or 0 – 20 mA current output. The main advantage of this kind of signal is that its accuracy is not affected by the voltage drop.  
+
Direct contact with Wind2measure.com
  
−
Pulse counter
+
==Links==
−
With pulse counter port configuration the logger detects and counts electric pulses generated by switch closures. The most common sensors using this signal type are anemometers, flow meters and rain gauges.
+
[http://media.wix.com/ugd/742d6f_e15ee869d4d84f79ab4d463975963e3f.pdf Specification]
  
−
The configuration of every port is possible with the dedicated PC application.
+
Other related web sites:
  
−
SDI-12 is a digital port which supports up to 4 different measurements. The sensor’s address is defined with the use of the dedicated PC application.
+
www.wind2measure.com
 +
==References==
  
−
USB port together with PC application allow the direct download of the backup data stored in the memory unit. They are also used for the initial configuration of the logger’s channels and SDI-12 address, SIM card and APN settings.
 
  
−
The reference voltage is dedicated to potentiometric sensors. Both terminal ends of the resistance element should be connected to this port. The wiper terminal must be connected to channel with the 0 – 3 V configuration.
+
[[Category:Equipment]]
−
 
 
−
The terminal is used for powering the data logger. The input voltage must be between 5 - 35V.
 
−
 
 
−
In order to power the sensors, the appropriate power source must be connected to this terminal. Supplied voltage is conveyed to the individual SPW connector of each channel for 100ms (millisecond) before each measurement. 
 
−
 
 
−
The battery slot operates with two D-type batteries. It will automatically switch to the battery backup power supply when the voltage of the main power source will drop below 5V. Depending on the data upload interval, the logger can fully operate for up to 10 days on back up batteries.
 

Latest revision as of 12:00, 3 August 2016

Data Logger RADIO

Product description:

GSM/GPRS Data Logger RADIO is a universal device used for accurate and cost-effective measurement applications. Thanks to the various configurable inputs of current, voltage, pulse or SDI-12 signal, the logger supports the majority of the most popular sensors available on the market.

The device has been designed for wide use in meteorological, agricultural, hydrological and industry related installations where precision, reliability and easy data access are key factors. Constant data transmission in 1 or 10 minute intervals is ensured by a built-in GSM/GPRS modem. All measurements are accessible through the intuitive web based Data Analysis System.

Parameter to be measured:

humidity, temperature, water level, rainfall, soil moisture, wind speed, wind direction and other

Method:

4 configurable inputs with voltage (0-3V, 0-10V), current (0-20mA), pulse type signal and 4 inputs with SDI-12 signal type

Equipment:

Waterproof and dust tight enclosure made of polycarbon. Sutable for outdoor installation.

Power supply - 5–35V DC input from external primary or rechargeable batteries, external DC power supply, or regulated solar panel Build-in GSM 2G modem with standard antenna. 1 minute and 10 minute data sending intervals. Monitoring of 4 additional technical parameters: main power voltage, backup battery voltage, internal temperature and GSM signal strength. 
 Internal memory backup for min. 30 days depending on the no. of sensors. Dedicated on-line system for data view, storage and download. Customized alarms. Dedicated PC application for logger setup and backup data download.

Advantages:

GSM/GPRS data transmission in1 or 10 minute intervals 4 fully configurable inputs (0-3V, 0-10V, 4-20mA, pulse counter) SDI-12 input for up to 4 additional sensors One second data sampling High accuracy analog measurements Inlogger battery backup ensure fail-safe operation Web-based system for data visualization User configurable alarms Offline software for configuration and diagnostics

Problems/Questions:

Price:

Direct contact with Wind2measure.com

Links

Specification

Other related web sites:

www.wind2measure.com

References

Retrieved from "https://experimental-hydrology.net/wiki/index.php?title=Data_Logger_RADIO_-_GSM/GPRS_modem&oldid=6191"