Search results

*Test each sensor along the probe by covering one after the other with a wet clot *Look at the data carefully. Test if there is a preferential flow between pipe and soil.

* test device showed signs of rainwater entering the display

*Look at the data carefully. Test if there is a preferential flow between pipe and soil.

...emperature sensor shows strong thermal inertia, i.e. reacts slowly. In our test, an initial temperature difference of only 4 K (10°C to 6°C) took ~1 hour

Range test in field, handheld radio for communication

January 2007: First test version of the Experimental Hydrology Wiki is online.

Back at home, I decided to thoroughly test the cable with an unused logger and to repair the loose contact. However, I ...orruption, I carried an alternative coupler cable with me and I decided to test the communication on a free logger before connecting it to the actual rain

Test location: Adriatic Sea on the Croatian coast near Pula, mild to moderate wi

* in a solitary test, the Bluetooth connection with one probe using the external BT-adaptor rema

...meters||SD of relative error 5.8 %; distributions given from large set of test cases, plus results for alternative measurement set-ups||Multi-location fie

...rod according to Jens]]. It is far from being a systematic and conclusive test, nevertheless it gives some impression on trends in usability for untrained

The collected materials are invaluable for building and test-ing of different models: runoff formation, climatic, environ-mental and veg

initial test:

...en (2014): Airborne active and passive L-band microwave remote sensing – a test bed for SMAP fusion algorithms. Proceedings of the IEEE International Geosc